F065
Nominala Diametro de Ekstera Tubo:
- Rekomendita de la Entreprena Normo de HL Cryogenic Equipment. Ĝi ankaŭ povas esti produktita laŭ la postuloj de la kliento.
- Dezajna Premo:
- Rekomendita ≤ 16 baroj. Aŭ elektas Velditan Konektan Tipon (≤40 baroj).
- Materialo de Ekstera Tubo
Sen speciala postulo, la materialo de la interna kaj ekstera tubo estos elektita same.
3.1.3 Tipo de veldita konekto
modelo
Konekto
Tipo
Nominala Diametro de Interna Tubo
Dezajna Premo
Materialo
de Interna Tubo
Normo
Rimarko
W010
00X
Veldita Konekta Tipo por Statika Vakue Izolita Fleksebla Hoso
DN10, 3/8"
8~40 baroj
300 Serio Neoksidebla Ŝtalo
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Nominala Diametro de Ekstera Tubo: | |
| Dezajna Premo | Materialo de la Interna Tubo. | A estas 304, | DN40, 1-1/2" | C estas 316, |
| D estas 316L, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Dezajna Premo |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Rekomendita ≤ DN25 aŭ 1". Aŭ elektas la Vakuan Bajonetan Konektan Tipon kun Flanĝoj kaj Boltoj (de DN10, 3/8" ĝis DN80, 3"), Velditan Konektan Tipon (de DN10, 3/8" ĝis DN150, 6") | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Normo | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Nominala Diametro de Ekstera Tubo: |
| Rekomendita de la Entreprena Normo de HL Cryogenic Equipment. Ĝi ankaŭ povas esti produktita laŭ la postuloj de la kliento. | Materialo de Ekstera Tubo | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Tipo | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Normo | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Dezajna Premo. | / | DN25, 1" | DN25, 1" | / | |
| Materialo de la Interna Tubo. | / | DN25, 1" | DN25, 1" | / | |
| C estas 316, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Nominala Diametro de Interna Tubo:
| Rekomendita ≤ DN25 aŭ 1". Aŭ elektas la Vakuan Bajonetan Konektan Tipon kun Flanĝoj kaj Boltoj (de DN10, 3/8" ĝis DN80, 3"), Velditan Konektan Tipon (de DN10, 3/8" ĝis DN150, 6") | Nominala Diametro de Ekstera Tubo: |
| Rekomendita de la Entreprena Normo de HL Cryogenic Equipment. Ĝi ankaŭ povas esti produktita laŭ la postuloj de la kliento. | Dezajna Premo: |
| Rekomendita ≤ 16 baroj. Aŭ elektas la Velditan Konektan Tipon (≤40 baroj) | Materialo de Ekstera TuboSen speciala postulo, la materialo de la interna kaj ekstera tubo estos elektita same.3.2 Dinamika Vakue Izolita Tubarsistemo3/S |
| 3.2.1 Tipo de Konekto por Vakua Bajoneto kun Krampoj | modelo |
| Konekto | Tipo |
| Nominala Diametro de Interna Tubo | Dezajna Premo |
| Materialo | de Interna Tubo |
| Normo | Rimarko |
HDB01008
Vakua Bajoneta Konekta Tipo kun Krampoj por Dinamika Vakue Izolita Fleksebla Hoso
lDN10, 3/8"
l8 baroj
| 300 Serio Neoksidebla Ŝtalo C estas 316, | Materialo de la Interna Tubo. | |
| A estas 304, | B estas 304L,C estas 316,D estas 316L, | |
| E estas alia. | HLH | DB01508 |
| DN15, 1/2" | Dezajna Premo: | Dezajna Premo: |
| DN20, 3/4" | Dezajna Premo: | Dezajna Premo: |
| DN25, 1" | Dezajna Premo: | Dezajna Premo: |
| Nominala Diametro de Ekstera Tubo: | Dezajna Premo: | Dezajna Premo: |
Rekomendita ≤ 8 baroj. Aŭ elektas la Vakuan Bajonetan Konektan Tipon kun Flanĝoj kaj Boltoj (≤16 baroj), Velditan Konektan Tipon (≤40 baroj)Materialo de Ekstera TuboSen speciala postulo, la materialo de la interna kaj ekstera tubo estos elektita same.
Potenca Kondiĉo:
HL-HX-X-La loko bezonas provizi potencon al la vakupumpiloj kaj informi HL Cryogenic Equipment pri la lokaj elektraj informoj (tensio kaj hercoj).-00-X
3.2.2 Vakua Bajoneta Konekta Tipo kun Flanĝoj kaj Boltoj
modelo
Konekto
Tipo
Nominala Diametro de Interna Tubo
Dezajna Premo
Materialo
de Interna Tubo
Normo
Rimarko
Nominal Diameter of Inner Pipe
00X
8~16 baroj
DN10, 3/8"
8~16 baroj
300 Serio Neoksidebla Ŝtalo
Design Pressure
Dezajna Premo.
08 estas 8 baroj,
16 estas 16 baroj.
Materialo de la Interna Tubo.
A estas 304,
B estas 304L,
C estas 316,
D estas 316L,
E estas alia.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Vakue Izolita Faza Apartiga Serio | DN10, 3/8" | Armena
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FrancaNominala Diametro de Ekstera Tubo:X | DN15, 1/2" | |||||
| FrancaRekomendita ≤ 16 baroj. Aŭ elektas Velditan Konektan Tipon (≤40 baroj).X | DN20, 3/4" | |||||
| FrancaPotenca Kondiĉo:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Islanda
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| Franca08 estas 8 baroj,00X | kaj 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FrancaSamoano00X | DN15, 1/2" | |||||
| FrancaSindhi00X | DN20, 3/4" | |||||
| FrancaTaĝika00X | DN25, 1" | |||||
| FrancaTajlanda00X | DN32, 1-1/4" | |||||
| FrancaUzbeka00X | DN40, 1-1/2" | |||||
| FrancaLa kosa00X | DN50, 2" | |||||
| FrancaZulua00X | DN65, 2-1/2" | |||||
| FrancaOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Potenca Kondiĉo:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | 300 Serio Neoksidebla Ŝtalo | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FrancaDN15, 1/2"00X | DN15, 1/2" | |||||
| FrancaDN20, 3/4"00X | DN20, 3/4" | |||||
| FrancaDN25, 1"00X | DN25, 1" | |||||
| FrancaW03200X | DN32, 1-1/4" | |||||
| FrancaW04000X | DN40, 1-1/2" | |||||
| FrancaW05000X | DN50, 2" | |||||
| FrancaW06500X | DN65, 2-1/2" | |||||
| FrancaW08000X | DN80, 3" | |||||
| HVakua Jaka Hoso00X | DN100, 4" | |||||
| HĈina Likva Oksigena Fluo Reguliganta Valvo00X | DN125, 5" | |||||
| HPogranda Prezo Ĉinio Ĉinio ISO Norma Tanko 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSDinamika Vakuopumpila Sistemo00X | Vakue Izolita Faza Apartiga Serio | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FrancaWhatsApp00X | DN15, 1/2" | |||||
| FrancaWeChat00X | DN20, 3/4" | |||||
| FrancaGermana00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Greka
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Dana
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaoX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | Armena
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHEstonaX | DN15, 1/2" | |||||
| HLHFrisaX | DN20, 3/4" | |||||
| HLHGuĝarataX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Islanda
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalajala00X | Maorioj | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDSamoano00X | DN15, 1/2" | |||||
| HLHDSindhi00X | DN20, 3/4" | |||||
| HLHDTaĝika00X | DN25, 1" | |||||
| HLHDTajlanda00X | DN32, 1-1/4" | |||||
| HLHDUzbeka00X | DN40, 1-1/2" | |||||
| HLHDLa kosa00X | DN50, 2" | |||||
| HLHDZulua00X | DN65, 2-1/2" | |||||
| HLHDOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
